Jabsco Par Max 2.9 Automatic Water Pressure pump 12v 31395-0292

JABSCO PAR MAX 12V 2.9GPM
AUTOMATIC WATER PRESSURE PUMP
MODEL 31395-0292

FEATURES
• Smooth Flow
• Self-Priming up to 10 feet (3m)
• Dry running capability
• Soft noise absorbing mounts
• Snap-fit port fittings
• Built-in bypass — less pulsation
• Reduces need for accumulator tank
• Corrosion resistant materials
• Thermal overload protection
• Motor rating: IP 54
• CSA listed
• ISO 8846 MARINE (ignition protection)
•
SPECIFICATIONS
Motor: Permanent Magnet, Ball Bearing Totally Enclosed.
Not for Continuous Duty. Intermittent Duty Only.
Pump Series Dimensions - Inches (mm) Weight
Height Width Length lb. (kg)
4-3/4" (121) 6" (152) 9" (229) 3.5 (1.6 kg)

With pump switch off and battery fully charged, fill water tank,
open all faucets, then turn pump switch on. Water will begin to
flow. When the water is free of air, turn faucets off. Remember,
you are filling the water heater and the toilet and shower lines.
When all valves are shut-off, pump will stop. Should pump fail to
stop, turn switch off and see the trouble shooting guide.

MODEL 31395-0292
12VOLTS
4.4AMP DRAW (A)@ 10 psi (0.7 bar)
FUSE SIZE 10 (A)
OPEN FLOWGPM 2.9 (11) (l/min)
MAX PSI 25 (1.7) (bar)